Contact Us

You are here:Home >> Products >> Industrial PoE Switch...

Industrial PoE Switch

Industrial 2*100M FX and 6*10/100M TX with PoE (OPT-IES1026P series)

OPT-IES1026P series is OPTONE produced unmanaged 8-port PoE switches, providing 2 Fast Ethernet fiber optional port and 6 10/100Base-TX PoE ports compliant with IEEE802.3af and IEEE802.3at. While transmitting data over the cable, each PoE port can output 30 watts to PoE terminals directly, eliminating the need for additional wiring. OPT-IES1026P series supports wide operating temperature range from -40°C to 85°C, metal housing with IP40 protection class and redundant power inputs, becoming an economical and harsh environment resistant solution for the ITS, video surveillance and other automation applications.
    ●Green Ethernet solution with ultra-low power consumption design 
    ●Both standard and wide operating temperature
    ●Complies with IEEE802.3, IEEE802.3u, IEEE802.3x auto-negotiation
    ●IEEE802.3at, IEEE802.3af PoE standard compliance
    ●Support PD detection and PD classification
    ●Supports auto MDI/MDIX function
    ●Status LED for easy monitoring of device status
    ●Maximum frame size of 1632 bytes 
    ●Support 8k MAC address
    ●Supports DIN-Rail and hang wall mounting
    ●Support dual power supply backup
    ●IP40 protection class
    6 x Ethernet+PoE port (RJ45) 10/100Base-Tx
    2 x Optical port (1x9) 100Base-Fx
    Optical Port
    Available for 1310nm and 1550nm Single mode, and 1310nm Multi mode 
    Transfer Distance: up to 120km
    Connectors: SC, ST optional
    Fiber core: 9/125μm on single-mode fiber; 50/125μm and 62.5μm on multi-mode fiber
    Ethernet Port
    Cable: Cat 5/5e/6 UTP cable
    Available speed: force 10Mbps, force 100Mbps and auto-detective 10/100Mbps Full-Duplex and Half-Duplex auto-negotiation
    Connectors: RJ-45 Connector; MDI/MDI-X connection auto-sensing
    IEEE802.3 (10Base-T)
    IEEE802.3u (100Base-TX)
    IEEE802.3x (Flow control)
    IEEE802.3af (Power over Ethernet Standard)
    IEEE802.3at (Power over Ethernet Enhancements Standard)
    Switch Properties
    MAC Table: 8K
    Packet Buffer: 1Mbit
    Switching Delay: <5μs
    LED Indicators Power Status, Speed Status, FX Link/Act, TX Link/Act 
    PoE Specification
    Power Output: PoE 48V DC
    PoE Power Supply type: End-Span
    Power Pin Assignment: 1/2(+), 3/6(-)
    PoE Power Budget: Each port provides max 30W feed power
    Power Requirement
    Input: 48VDC
    Consumption:MAX 5.3W(no PD), 185.3W(full PD)
    Overload Protection: Support
    Reverse Connection Protection: Support
    Redundancy Protection: Support
    Physical Characteristics
    Housing: Metal enclosure
    Protection Class: IP40
    Dimensions: 53 x 165 x 145mm(Excluding the connector, DIN rail and component for panel mounting) 
    Weight: 0.85kg
    Installation: DIN-Rail or Panel mounting
    Environmental Limits
    Operating Temperature: -40°C to 85°C
    Storage Temperature: -40°C to 85°C
    Operating Humidity: 10% to 95% RH (non-condensing)
    Storage Humidity: 5% to 95% RH (non-condensing)
    Industrial Standard
    IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)
    IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)
    IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV
    IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV
    IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)
    IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)
    Shock: IEC 60068-2-27
    Free Fall: IEC 60068-2-32
    Vibration: IEC 60068-2-6
    Warranty 5 years 
    Model No. Description
    OPT-IES1026PM 2*100Base-Fx to 6*10/100Base-Tx(PSE), Multi mode, 2Km, SC/ST
    OPT-IES1026PS 2*100Base-Fx to 6*10/100Base-Tx(PSE), Single mode, 20Km, SC/ST
    OPT-IES1026PW 2*100Base-Fx to 6*10/100Base-Tx(PSE), Bi-Directional, 20Km, SC/ST

Related products